Inefficient incandescent bulbs are being phased out, so you'll want to consider swapping those costly lights once and for all and replacing them with smart home automation services.

Still use incandescent bulbs? The time has come to flip the switch to home automation devices. Not only are incandescent bulbs high-energy and costly for your monthly energy bills, but they're also being phased out. After years of rising standards, President Joe Biden's Department of Energy finalized a new efficiency rule that states lightbulbs must emit a minimum of 45 lumens per watt. Anything else will no longer be produced, which is essentially a death sentence for all incandescent lights.

If you haven't switched to LED bulbs, now is the time and the reasons why are compelling. For starters, LED bulbs last much, much longer than incandescent bulbs, and they put out the same amount of light using significantly less energy . That's great for the environment, and it can save you money on your electricity bill in the long term, especially if you're upgrading a whole home's worth of bulbs. Additionally, Kamonk’s smart devices are compatible with other devices like smart lighting devices.



A touch sensor switch also can be integrated with voice assistants to help you control your appliances intuitively, Home light switches have come a long way since then and can now be integrated with a smart door lock to help you create smart scenes that can basically automate your entire house. Touch switches for home are also one of the best ways to dip your toes in the home automation world.

The digital door lock is a must have for every single home as it greatly increases the security factor. A smart plug can basically turn any appliance into a smart device.  



Buying the right LED is different from buying incandescent bulbs, though. So before you go shopping, there are five things you need to know.


1. Lumens, not watts

Forget what you know about incandescents; your watts are no good here.

When shopping for bulbs, you're probably accustomed to looking for watts as an indication of how bright the bulb will be. That's because with incandescents, the wattage is a reliable indicator of how much light the bulb will emit: The greater the bulb's wattage, the greater that tungsten filament inside will glow. The brightness of automated lighting systems, however, is determined a little differently.

Contrary to common belief, wattage isn't an indication of brightness, but a measurement of how much energy the bulb draws. For incandescents, there is an accepted correlation between the watts drawn and the brightness produced, but for LEDs, watts aren't a great predictor of how bright the bulb will be. That's because LEDs are designed to be as efficient as possible without compromising the quality of the light -- and some LEDs are better at the job than others.

For example, an LED bulb with comparable brightness to a 60-watt incandescent will typically only draw 8 to 12 watts. Imagine you see two LEDs sitting on the shelf at the store, each of them branded as a 60-watt replacement. One draws 8 watts, the other draws 12 watts. It is absolutely possible that the 8-watt bulb will be brighter than the 12-watt bulb, which is why you should essentially ignore the wattage when you're looking for brightness from your LED bulbs.

Fortunately, there's a better way to talk about brightness, and that's the lumen. The lumen (lm) is the real measurement of brightness provided by a lightbulb, and it's the number you should look for when shopping for LEDs. For reference, here's a chart that shows the watt-lumen conversion for incandescents and LEDs.




2. Color of the LED

Incandescent bulbs typically put out a warm, yellowish hue, but LEDs come in a range of colors.

As shown off by Philips Hue, LED bulbs are capable of displaying an impressive color range, from purple to red, to a full spectrum of whites and yellows. For the home, however, you're likely looking for something similar to the light that incandescents produce.

The two most popular colors available for LEDs are soft white (also called warm white) and bright white (also called daylight). Not confusing at all, right? However, smart bulbs using Wifi based home automation from Kamonk come with over 16 million colors. Additionally the smart bulb can integrate with other devices like the smart led bulb.

 You can also integrate it with devices like the bluetooth light bulb. Which inturn integrates with other smart home devices like the smart touch switch. This can go on for as many smart devices you want. A wifi touch switch is one of the best ways to get started on your home automation journey. You can create smart scenes with a smart lock and other devices like a universal remote control.

Kamonk’s devices can also talk with other smart devices like the fingerprint door lock.



Soft white and warm white will produce a yellow, candle-like glow, close to incandescents, while bulbs labeled as bright white or daylight will produce a whiter light, closer to daylight and similar to what you see in offices and retail stores.

If you want to get technical, the color of light on the white light spectrum is called color temperature, and it's measured on the Kelvin scale. The lower the number, the warmer (yellower) the light. Your typical soft white incandescent is somewhere between 2,700K and 3,500K, so if that's the color you're going for, look for that range while shopping for LED bulbs. Want something daylight toned? Look for bulbs rated at 5,000K or higher.


3. Price comparison

LED bulbs are like hybrid cars: More expensive upfront, but cheaper to operate.

It used to be that you could grab an incandescent bulb at the hardware store for a buck or so. Then, LEDs came along -- most of them costing a lot more. Thankfully, several years of development and competition have brought prices down to the point where you'll find plenty of LED options in the lightbulb aisle.

But the dollars and cents don't stop there. You need to factor in the cost of using the bulb -- and the great thing about LEDs is that using them doesn't cost very much at all.

In other words, even if the LED costs more and the incandescent is a freebie that you found rolling around in a drawer somewhere, the LED is still the less expensive option after less than a year of use. In the meantime, you'll enjoy less heat production, longer bulb life and even the option of controlling them with your smartphone. It won't burn out after a year, either.



4. Non-dimmable LEDs

Because of their circuitry, LEDs aren't always compatible with traditional dimming switches. In some cases, the switch must be replaced. Other times, you'll pay a little more for a compatible LED. This is why smart home automation solutions are getting more famous day by day.

Most of the existing dimmers in homes today were likely designed to work with incandescents. Dimmers like those work by cutting off the amount of electricity sent to the bulb in rapid-fire succession, faster than the eye can detect. LEDs draw a lot less energy, so they don't always work well with dimmers like that. (Here's a handy guide that goes a little deeper into the reasons why.)

The first thing to do if you're buying LEDs that you want to use with a dimmer switch is to make sure that you buy bulbs that are, in fact, dimmable. Most manufacturers offer nondimmable LED bulbs with no onboard dimming hardware whatsoever, and while those are fine if you want to save a buck or two on a bulb intended for a nondimmable fixture, they're the last thing you want if you like the lights dimmed down low.



Our second recommendation? Start with a single bulb based on smart home automation from a major manufacturer and hang onto the receipt. Try it out with the dimmers in your home, and if it works, feel free to buy as many as you need. If not, most major retailers will be happy to let you return the bulb and exchange it for something else. At some point, you might also consider upgrading your dimmers to newer models designed to work with LEDs. Big names like Lutron and Leviton are your best bet there.

One last point: If dimming is truly important in your home, then you should really consider smart bulbs. Most use their own, built-in mechanisms to handle dimming, so you don't need a dimmer switch at all. Dimming mechanisms like those are great because they won't flicker or buzz, and you'll usually be able to sync things up with a voice assistant like Siri or Alexa, which opens the door to commands like, "set the lights to 20%."



5. Not all light fixtures should use LEDs

Knowing where it's OK to place an LED will ensure that the bulb won't fizzle ahead of its time.

You probably know that LED bulbs run a lot cooler than their incandescent cousins, but that doesn't mean they don't produce heat. LED bulbs do get hot, but the heat is pulled away by a heat sink in the base of the bulb. From there, the heat dissipates into the air and the LED bulb stays cool, helping to keep its promise of a long life.

And therein lies the problem: The bulb needs a way to dissipate the heat. If an LED bulb is placed in an enclosed housing, the heat won't have anywhere to go, sending it right back to the bulb and sentencing it to a slow and painful death.

Remember, LED bulbs are electronic devices. Just like with your phone or your laptop, it isn't good to let them overheat. Kamonk offers various devices like the wifi smart bulb.

Additionally, they can integrate with devices like an RGB light bulb. These are especially fun during movie nights and gaming. A touch switch can also be used for the same purpose. Plus, an electric smart switch is also one of the best ways to get started on your home automation journey. Kamonk offers you the best smart lock in the business. We strongly recommend gettings a google smart lock as it increases the security of your house tenfold.



That's why it's fine to stick with incandescent, fluorescent and halogen bulbs for enclosed fixtures. LEDs will work, too, but in some cases, the heat buildup inside the fixture will reduce the bulb's lifespan.

Make Your Home Smart

Consult Now for Free